Skip to main content

Independent service, not a government website.

Understanding NAICS codes for government contracting

What NAICS codes are, how the six-digit structure works, how they drive SAM.gov registration and size standards, and how they differ from PSC codes.

Government Bid Finder · Updated · 5 min read

NAICS codes look like a bureaucratic detail, but in federal contracting they decide which solicitations you see, whether you count as a small business for a given bid, and how agencies find you. Picking them carefully is one of the cheapest things you can do to improve your results. This guide explains how the codes work and how to choose them.

What NAICS is

The North American Industry Classification System (NAICS) is the standard used by US, Canadian, and Mexican statistical agencies to classify businesses by the type of economic activity they perform. In the US, the Census Bureau (opens in a new tab) publishes the codes and their definitions. The system is reviewed and revised on a regular cycle, roughly every five years, so codes and descriptions occasionally change.

NAICS was built for statistics, not procurement. Federal contracting borrowed it because it was already a common language for describing industries. That is why some definitions feel awkward when applied to a specific contract.

How the six-digit structure works

Each NAICS code is hierarchical. Every additional digit narrows the classification.

Digits Level What it represents
2 Sector Broad area of the economy, such as construction or professional services
3 Subsector A major group within the sector
4 Industry group A narrower cluster of related industries
5 NAICS industry An industry defined consistently across the three countries
6 National industry A US-specific detail level

Federal contracting uses the full six-digit code. When you search the Census NAICS site (opens in a new tab), read the full definition and the cross-references, which tell you which related activities belong in other codes. The cross-references often settle which of two similar codes is correct.

How NAICS codes are used in federal contracting

In your SAM.gov registration

When you register in SAM.gov (opens in a new tab), you list the NAICS codes that describe the goods and services you provide, and you designate one as your primary NAICS code.

  • Primary NAICS. The code for your main line of business. It is a signal to agencies and primes about what you mainly do.
  • Additional NAICS. Other codes that describe work you can perform. There is no requirement that every code be your core business, but each one should reflect something you can actually deliver.

Based on your registration information, SAM.gov shows whether you are small for each NAICS code you list. Agencies and prime contractors search registrations by NAICS when doing market research, so an incomplete list can make you invisible.

On each solicitation

Each solicitation is assigned a single NAICS code by the contracting officer, who chooses the code that best describes the principal purpose of what is being bought (see FAR Part 19 (opens in a new tab)). That one code, and its size standard, decide whether you qualify as small for that procurement.

This matters in practice:

  • The code on the solicitation does not have to match your primary NAICS. If you meet the size standard for the assigned code and can do the work, you may be able to compete as a small business.
  • The assigned code can be appealed if an interested party believes it is wrong. Appeals go to the SBA's Office of Hearings and Appeals under short deadlines; check current SBA rules if you think a code is misassigned.
  • On multiple-award contracts, different portions may carry different codes. Read the solicitation carefully.

Size standards: why the code matters so much

The SBA sets a size standard for each NAICS code. A business at or below the standard is small for procurements under that code. The standards are expressed in one of two ways:

  • Average annual receipts, used for most services, construction, and retail industries.
  • Average number of employees, used for most manufacturing, wholesale trade, and some other industries.

The calculation methods, averaging periods, and the standards themselves change from time to time. As of this writing, the SBA publishes its current table of size standards (opens in a new tab) and a size standards guide and tool (opens in a new tab). Use those rather than numbers quoted in older articles.

Size is generally measured including your affiliates, not just your company alone. Affiliation rules are detailed, and if you have common ownership, management, or significant contractual ties with other firms, review the SBA rules or get qualified advice before certifying as small.

A business can be small under one NAICS code and other than small under another. That is normal and is exactly why SAM.gov shows your status per code.

How to choose your NAICS codes

A practical process:

  1. List what you actually sell. Write down your main products and services in plain language, ideally based on revenue.
  2. Search the Census NAICS tool. Use keywords from your list and read the full definitions, including what is excluded.
  3. Check how agencies code similar work. Search past awards on USAspending.gov (opens in a new tab) and open notices on SAM.gov for work like yours, then note the NAICS codes used. Agencies do not always use the code you would expect.
  4. Choose a primary code. Pick the one that best reflects your main line of business.
  5. Add additional codes deliberately. Include codes for work you can perform and want to bid on. Avoid padding with codes for work you cannot deliver.
  6. Check size standards. Look up the size standard for each code so you know where you count as small.
  7. Review annually. When you renew your SAM.gov registration, or when your business changes, revisit your list.

NAICS vs. PSC codes

NAICS is not the only code on a federal notice. Product Service Codes (PSCs) also appear, and they describe something different.

NAICS PSC
Describes The industry of the business doing the work What the government is buying
Format Six digits Four characters, letters and numbers
Set by Census Bureau (definitions); SBA (size standards) Federal government, documented in the PSC Manual (opens in a new tab)
Used for Size determination, SAM.gov registration, market research Spending categorization and reporting

A single solicitation has one NAICS code and usually one or more PSCs. When searching SAM.gov, filtering by PSC is a useful complement to NAICS because it catches notices where the agency chose an unexpected NAICS code for work you do.

Common mistakes

  • Listing only one code. You may miss solicitations coded under adjacent industries.
  • Listing codes you cannot perform. It wastes buyers' time and can look careless.
  • Ignoring size standards. Bidding a small business set-aside when you are not small under that code can create serious problems.
  • Using outdated code lists. Codes are revised periodically; confirm yours still exist and mean what you think.

Next steps

Questions

What is a NAICS code?

A NAICS code is a six-digit number from the North American Industry Classification System that classifies a business by the type of economic activity it performs. The U.S. Census Bureau publishes the codes and definitions. In federal contracting, NAICS codes drive your SAM.gov registration, the small-business size standard for each bid and how agencies find you in market research.

What do the digits in a NAICS code mean?

Each digit narrows the classification: the first two digits are the sector, three the subsector, four the industry group, five the NAICS industry and six the US-specific national industry. Federal contracting uses the full six-digit code. When you look up a code, read the full definition and its cross-references, which point to related activities that belong in other codes.

What is the difference between NAICS and PSC codes?

NAICS codes describe the industry of the business doing the work, while Product Service Codes (PSCs) describe what the government is buying. A NAICS code is six digits and is used for size determination and SAM.gov registration; a PSC is four letters and numbers used for spending categorization and reporting. A solicitation has one NAICS code and usually one or more PSCs.

Can I be a small business under one NAICS code and not another?

Yes. The SBA sets a separate size standard for each NAICS code, measured in average annual receipts or average number of employees, so a business can be small under one code and other than small under another. SAM.gov shows your small-business status for each code you list. Size is generally measured including your affiliates.

Official sources

See which open federal notices fit your company.

Enter your website. The preview is free and needs no account.