Skip to main content

Independent service, not a government website.

Common federal bidding mistakes (and how to avoid them)

The errors that knock federal bids out before or during evaluation, from missed amendments and late submissions to weak bid/no-bid calls, and how to avoid them.

Government Bid Finder · Updated · 5 min read

Many federal proposals lose for reasons that have nothing to do with the quality of the company behind them. They arrive late, miss an amendment, ignore a page limit, or answer a question the government did not ask. The good news is that these mistakes are preventable with a repeatable process. Here are the most common ones and how to avoid each.

Mistakes that get you eliminated before evaluation

Missing amendments

Solicitations change after release. Amendments can move the due date, change quantities, answer questions, or revise the evaluation criteria. If you do not acknowledge a material amendment, your offer may be rejected, and in sealed bidding a bid that does not account for a material amendment is generally nonresponsive.

Avoid it: Follow the notice on SAM.gov so you are alerted to changes, check the notice again the day before submission, and list every amendment number in your submission as the solicitation instructs.

Submitting late

In federal contracting, late is late. Under the FAR rules for negotiated procurements (FAR 15.208 (opens in a new tab)) and similar provisions for other procurement types, proposals received after the exact time specified are generally late and are not considered, with only narrow exceptions. "Our email got stuck" or "the portal was slow" usually does not help you.

Avoid it:

  • Note the exact time and time zone. Many deadlines are in the buying office's local time.
  • Confirm the submission method and file size limits in advance.
  • Aim to submit at least a day early, and get confirmation of receipt.

Expired SAM.gov registration

Many solicitations require an active SAM.gov registration when you submit your offer, not just at award. Registrations must be renewed at least every 365 days, and a lapsed record can disqualify an otherwise strong offer.

Avoid it: Check your status at SAM.gov (opens in a new tab) before you start a proposal, and renew well ahead of expiration. See registering for federal contracting.

Ignoring Section L instructions

In solicitations that use the Uniform Contract Format, Section L tells you how to prepare your proposal: volumes, page limits, font size, margins, file formats, and the order of information. Evaluators may stop reading at a page limit or remove pages that break the rules. Commercial-item solicitations put these instructions elsewhere, often in an addendum to the instructions provision, but the principle is the same.

Avoid it: Build a compliance matrix that maps every instruction to where your proposal addresses it, and have someone not on the writing team check it before submission.

Mistakes in eligibility and fit

Wrong size or NAICS assumptions

Your size is measured against the size standard for the NAICS code assigned to the specific solicitation, not the code you usually use. You can be small under one code and other than small under another.

Avoid it: Look up the solicitation's NAICS code and compare your average receipts or employees against the current SBA size standards (opens in a new tab). Our guide on understanding NAICS codes explains how this works.

Ignoring set-aside eligibility

Bidding on an 8(a), HUBZone, service-disabled veteran-owned, or women-owned set-aside requires the relevant status, typically including certification where the program requires it. Believing you qualify is not the same as being certified.

Avoid it: Confirm both size and certification before you start writing. Also read the limitations on subcontracting clause so you know how much of the work you must perform yourself. See evaluating bid eligibility.

Overlooking past performance requirements

Some solicitations require a minimum number of recent, relevant projects of similar size and scope. If you cannot meet the requirement, a well-written technical volume may not save you.

Avoid it: Read the past performance section first. If your record is thin, consider whether a teaming arrangement or a subcontract role would be a better entry point.

Mistakes in strategy

Bidding on everything

Volume does not produce wins. Each proposal costs time and money, and spreading effort across poorly matched bids lowers the quality of all of them.

Avoid it: Use a written bid/no-bid checklist. Common questions:

Question Red flag
Do we meet every mandatory requirement? Any "no"
Do we have relevant past performance? Nothing similar in size or scope
Do we know the customer or the incumbent situation? No knowledge at all
Can we price competitively and still profit? Margins only work if everything goes right
Do we have time to write a compliant proposal? Due date too close for your team

Not asking questions before the deadline

Solicitations usually set a deadline for written questions. After it passes, ambiguities you noticed will likely stay ambiguous, and you will have to guess.

Avoid it: Read the full solicitation as soon as you decide to pursue it, and submit clear questions early through the channel the solicitation specifies.

Not requesting a debriefing

If you lose, a debriefing is one of the most valuable things you can get: how your proposal was rated and, in many cases, the overall ranking and the awardee's evaluated price. In negotiated procurements, debriefing rights are covered in FAR Part 15 (opens in a new tab), and request deadlines are short, often a few days after notification.

Avoid it: Request a debriefing in writing as soon as you receive notice, whether you won or lost.

Mistakes in the proposal itself

Not answering the Section M evaluation factors

Section M (or its equivalent in a commercial solicitation) tells you exactly how the government will judge proposals. Proposals that describe the company in general terms instead of addressing each factor and subfactor make evaluators hunt for the information, and they may not find it.

Avoid it: Use the evaluation factors as your outline. Mirror their language in your headings so evaluators can find each answer.

Generic, boilerplate proposals

Reused text about "our commitment to quality" does not show that you understand this agency's problem. Evaluators look for specific approaches, named staff, realistic schedules, and evidence.

Avoid it: Tie every claim to the requirement and back it with a concrete example, a metric from past work, or a specific method.

Pricing errors

Arithmetic mistakes, missing line items, unbalanced pricing, or prices that do not match the technical approach can sink an otherwise strong offer. In construction and services, failing to price wage determination rates correctly is a common and expensive error.

Avoid it: Have a second person check every price schedule, confirm totals, and make sure the technical and price volumes describe the same staffing and scope.

Over-relying on summaries and third-party tools

AI summaries, bid-matching tools (including ours), and third-party databases are useful for finding opportunities and getting oriented. They can also miss attachments, misread a requirement, or lag behind an amendment. The official solicitation on SAM.gov, along with its amendments and the contracting officer's answers, is what governs.

Avoid it: Use tools to decide what to read, then read the official documents in full before you bid. If anything conflicts or is unclear, ask the contracting officer. For legal questions, consult a qualified advisor.

Next steps

Questions

Why do government bids get rejected?

Most federal bids are rejected for preventable reasons rather than the quality of the company: they arrive late, miss an amendment, ignore Section L instructions such as page limits, or fail to answer the Section M evaluation factors. An expired SAM.gov registration or a wrong assumption about size under the solicitation's NAICS code can also knock out an otherwise strong offer.

Will the government accept a late proposal?

Generally no. Under FAR 15.208 and similar provisions for other procurement types, proposals received after the exact time specified are generally late and are not considered, with only narrow exceptions. Note the exact time and time zone, confirm the submission method in advance, and aim to submit at least a day early with confirmation of receipt.

Can an expired SAM.gov registration disqualify my bid?

Yes. Many solicitations require an active SAM.gov registration when you submit your offer, not just at award, and registrations must be renewed at least every 365 days. Check your status before you start a proposal and renew well ahead of expiration.

How do I decide whether to bid on a government contract?

Use a written bid/no-bid checklist instead of bidding on everything. Ask whether you meet every mandatory requirement, have similar past performance, know the customer or incumbent, can price competitively and still profit, and have time to write a compliant proposal. A clear no on any of these is a red flag.

Official sources

See which open federal notices fit your company.

Enter your website. The preview is free and needs no account.